Voltage drop shouldn't be a issue I hope.
I've been watching CL for a deal on wire before i had to buy it retail. Today I picked up 100 ft of 1/0 for $150, a little big for my needs but cheaper than buying a smaller gauge at retail. It wil...
Forum Discussion
Last time I did that type of job, I found it much easier and cheaper to buy some copper tubing to fit the cable and made my own lugs. They were over kill too but they didn't have to be done a second time.
Soldered them first and then mashed the lug flat in a vice. It was easier than trying to crimp it tight enough and then wondering if it was good enough.
Soldered them first and then mashed the lug flat in a vice. It was easier than trying to crimp it tight enough and then wondering if it was good enough.
