Voltage drop shouldn't be a issue I hope.
I've been watching CL for a deal on wire before i had to buy it retail. Today I picked up 100 ft of 1/0 for $150, a little big for my needs but cheaper than buying a smaller gauge at retail. It wil...
Forum Discussion
FWIW, I used a hammer crimper on a few lengths of 1/0 to secure the lugs. I guess a guy could use a vise with the same tool but I'm pretty darn good with a hammer.
One issue I see with the cheaper hydraulic crimpers is that the dies are in metric sizes.
One issue I see with the cheaper hydraulic crimpers is that the dies are in metric sizes.
