Voltage drop shouldn't be a issue I hope.
I've been watching CL for a deal on wire before i had to buy it retail. Today I picked up 100 ft of 1/0 for $150, a little big for my needs but cheaper than buying a smaller gauge at retail. It wil...
Forum Discussion
I decided to buy a crimping tool after looking for the vise plates for a while this morning. I found a half a dozen smaller crimpers but nothing big enough to do 1/0.
I didn't buy the HF tool because of the small dies and it would have to be shipped here. I found this one on ebay with a few dies bigger for $39 including shipping. Most of the less expensive ones only had dies up to the 70 size, I wanted to make sure I had one big enough.
click.
I didn't buy the HF tool because of the small dies and it would have to be shipped here. I found this one on ebay with a few dies bigger for $39 including shipping. Most of the less expensive ones only had dies up to the 70 size, I wanted to make sure I had one big enough.
click.
