Voltage variations and Surge cut off.
We are hooked up to 50A service. I just recorded the voltages at different areas and I will note them below. I have a Progressive EMS/Surge suppressor hard wired in just before the breaker box. It has...
Forum Discussion
Got a call back from Progressive Industries today and I guess I did the right thing. I noted to him what my voltage readings were and how I did them and told him neutral was fine. The display board on the EMS does signal the EMS when the voltage peak is either too low or high to disrupt the voltage. It is not there just to display the voltage. He indicated the pots might have swayed due to age. Should it happen again, I could replace the board.
Thanks for all your help.
Thanks for all your help.
