Was having trouble with Frig.

I have a 1990 Dometic and it is bulletproof if you keep all connections clean. This is not to say it can't or won't fail, it is just in my experience with my fridge and a lot of Servels from the 40's and on that don't have processor based boards. I've had two "failures", both were contact failures. One required replacing a corroded faston and one just cleaning stuff.

If one is not experienced with or not interested in learning trouble shooting, then the OP's decision is best with the exception of buying the board first.

Fuses do "tarnish" and contact may be lost as a result. other things can happen that can cause a fuse that LOOKS GOOD to fail.. That is why we have fuse testers.

RJsfishin wrote:

Chris Bryant wrote:

Big Redneck wrote:
We left the frig. on electric for 4 hours and did not get cold. I though it started to get cold but didn't. Now I don't know what to do. It works on gas.

It takes far longer than 4 hours to get cold. Turn it on electric and run it for 24 hours before worrying.

It would be cold in 4 hrs,....not making ice, but cold.

The back of the freezer maybe, but certainly not the main box, no way, no how.

Regardless, the OP hasn't given any info, or requests for troubleshooting help, so...

Chris Bryant wrote:

Big Redneck wrote:
We left the frig. on electric for 4 hours and did not get cold. I though it started to get cold but didn't. Now I don't know what to do. It works on gas.

It takes far longer than 4 hours to get cold. Turn it on electric and run it for 24 hours before worrying.

It would be cold in 4 hrs,....not making ice, but cold.

I turn the frig. on yesterday and just check it today and it does not work on electric. I just made a appointment at Jones RV to have them check it out Monday. I will see what they found wrong with it.

CHECK THE ELECTRICAL HEATING ELEMENT. Follow the white pair of wires up into the chimney boiler. You need a handheld meter on the 2K ohms setting to check the element. If the meter keeps blinking a 1 at you the element blew open.

Yes it a Dodge Diesel Scotty a 1995. I just turn the Frig on and set it the coldest. Will check in 24 hours. It only has 61,000 miles and been garage kept since new and still looks new.

Redneck, is that Scotty one of those on a Dodge chassis with the Cummins?

Big Redneck wrote:
We left the frig. on electric for 4 hours and did not get cold. I though it started to get cold but didn't. Now I don't know what to do. It works on gas.

It takes far longer than 4 hours to get cold. Turn it on electric and run it for 24 hours before worrying.

We left the frig. on electric for 4 hours and did not get cold. I though it started to get cold but didn't. Now I don't know what to do. It works on gas.