Water heater - propane problem
Atwood GC10A-4E Water heater 2014. Has worked fine until this trip. 1st day electric heat worked fine, when tried to switch to propane burner fired up and ran 3-5 seconds and went off, did this for ...
Forum Discussion
No clicking would indicate no power to circuit board.
Cerify continuity on thermostat and ECO.
Check for thermal fuse adjacent to the thermostat?eco. Normally hidden inside tubing. Should have continuity.
Check ground connection on the propane valve
Check continuity on each of the coils for the propane valve. Coils should read the same.
Cerify continuity on thermostat and ECO.
Check for thermal fuse adjacent to the thermostat?eco. Normally hidden inside tubing. Should have continuity.
Check ground connection on the propane valve
Check continuity on each of the coils for the propane valve. Coils should read the same.
