ferndaleflyer wrote:
I can't check right now but when it worked no matter which switch I activated the other red light also came on. The green light at the control panel switch may, I say MAY, have stayed on all the time. It has a bunch of wires to it. The way I have it now when I turn on the light, power, all 3 lights 2 red and one green at the panel come on. It works fine the way I have it now although not correct.
Ground seems to be fine at the pump. I see no kind of controller at the pump. Wires go into a harness and disappear up into who knows where.
Maybe the problem is at the green switch. Try checking voltage at each of the multiple wires and see if you get one terminal that has 6 volts when the switch is on. If so then temporarily run 12 volts to that wire and see if the problem goes away.