Forum Discussion

MEXICOWANDERER's avatar
MEXICOWANDERER
Explorer
Sep 20, 2014

WFCO Please Describe The Operational Malfunctions

Do some of the critters not even attempt to switch into "boost" mode despite starting out at say, 12.2 volts? Or is it a threshold issue, where unusually low voltage is needed to trigger the boost mod...
CJW8's avatar
CJW8
Explorer
Sep 21, 2014
Years ago I tried a WFCO8955 or 45 (don't remember). It was about 12 feet of #6 wire with frame negative. It would not go into boost no matter what I tried. Before I returned it to Randy, I set it up and tested it with about 18" of # 6 wire and it worked as advertised. I traded it back to Randy for a Xantrex XADC that works great. It goes to 14.2 every time it is powered on.

About Technical Issues

Having RV issues? Connect with others who have been in your shoes.24,194 PostsLatest Activity: Jan 29, 2025