WFCO Retrofit?
Did I read somewhere on one of these posts that Progressive Dynamics makes an retrofit type unit that you can just replace the converter part of the unit an leave all the panel stuff alone pretty much...
Forum Discussion
I removed my new wfco and replaced it with a Progressive Dynamics. As stated many times, I think that a lot of wfco converters don't work properly even when new. I know that mine did not. I ran my battery down on purpose by running some 12 volt stuff in the backyard. No matter how low I ran the battery, the wfco never charged at more than 13.6 volts.
I got a crazy price on the new PD and it took about an hour to install it. The new PD started at 13.6 volts and then jumped to 14.6 in a couple of seconds. It stayed there for a couple of hours and then switched to lower voltage.
This was the first modification I did to my new TT when I bought it.
I got a crazy price on the new PD and it took about an hour to install it. The new PD started at 13.6 volts and then jumped to 14.6 in a couple of seconds. It stayed there for a couple of hours and then switched to lower voltage.
This was the first modification I did to my new TT when I bought it.
