What are the good quality bearings for a TT?
Timken or SKF are as good as they get? A frame shop told me few years the name of a good one made in Japan but can't remember the name. This is the first time for me to be ordering bearings and se...
Forum Discussion
First of all, if proper maintenance is done, bearings are lifetime. There is no good reason to ever replace wheel bearings, unless they are rough or burnt from lack of grease, or water getting in them.
Second, there are no junk bearings sold in the united states, and probably goes for any other country in the world too. Don't blame your inexperience in relaceing bearing races, or adjusting bearings, onto cheap junk bearings !!
Thirdly, unless you are experienced in replaceing pressed in bearing races, don't !!! Improperly installed or adjusted bearings, can easily cause a catastrophe on the hiway, or at best a new axle.
Second, there are no junk bearings sold in the united states, and probably goes for any other country in the world too. Don't blame your inexperience in relaceing bearing races, or adjusting bearings, onto cheap junk bearings !!
Thirdly, unless you are experienced in replaceing pressed in bearing races, don't !!! Improperly installed or adjusted bearings, can easily cause a catastrophe on the hiway, or at best a new axle.
