What would cause a shudder under load
This is on my stock tranny (4L60E) in an 02 envoy, I was taking my tandem axle 14' trailer (about 1300 lbs) for it's annual inspection and I felt a shudder under load. I'm almost positive the TC was l...
Forum Discussion
I had a Bronco II that had a drive shaft shutter and it happen to be the slip yoke on the front of the drive shaft was worn (not the U-joint). unfortunately I had to replace the complete drive shaft, due to the way it was made.
Your cut down drive shaft may be still too long and is bottoming out under the load with the trailer connected.
Your cut down drive shaft may be still too long and is bottoming out under the load with the trailer connected.
