Where to buy crimped battery cable
I'm looking to finish a DYI inverter install and want to buy battery wire in fat gauges around 0, crimped. I want to keep all the runs as short as possible so want to specify an exact length, like 14 ...
Forum Discussion
LINK
LINK
This guy did a very good review right up to the review of the Harbor Freight crimper. He went out of the way to use only one die in the box and if it didn't work it didn't work. I have 4/0 crimps all over the coach done with TWO different sized dies that I would put up against anything he did with his favorite crimper. Does it take longer? Yep.. But it's still an ultra sanitary crimp, and there are plenty of us on this form that have the procedure down flat.
mikegt4 wrote:
A little late for this thread but here is good info on making your own cables.
http://www.pbase.com/mainecruising/battery_cables
LINK
This guy did a very good review right up to the review of the Harbor Freight crimper. He went out of the way to use only one die in the box and if it didn't work it didn't work. I have 4/0 crimps all over the coach done with TWO different sized dies that I would put up against anything he did with his favorite crimper. Does it take longer? Yep.. But it's still an ultra sanitary crimp, and there are plenty of us on this form that have the procedure down flat.
