wineguard antenna
I'm having trouble wrapping my brain around a problem. I replaced the shaft and gears on my antenna. inside and out, lubed everything like I should but the antenna is very hard to put up and down. it ...
Forum Discussion
you replaced the gears
did you clean the Alum housing and the square tubes,
lube them and the pins
those two (tubes/arms) create a fair amount of leverage against the gear
any binding there will greatly increase the effort needed
did you clean the Alum housing and the square tubes,
lube them and the pins
those two (tubes/arms) create a fair amount of leverage against the gear
any binding there will greatly increase the effort needed
