Wire nuts?
I just replaced a dimmer switch in my truck camper. I used wire nuts to connect the wires. Now I am starting to think I should have used "automotive" type connectors. Any experience or thoughts? W...
Forum Discussion
popeyemth wrote:
Maybe not REQUIRED by code but I believe 3M at least still recommends pretwisting .
From 3M;
"Installation Instructions
1. Strip wire insulation:
22–16 AWG = 5/8" 14–12 AWG = 1/2"
2. Firmly grasp wires, making sure insulation ends are
even and tightly bundled. (Wires may be twisted or
untwisted.) Lead stranded wires slightly. Slip the
connector over wire tips.
3. Turn connector onto wires in clockwise direction until
secure."
http://multimedia.3m.com/mws/mediawebserver?TTTTTTB_LdgTmwUTfwUTTTXYJDnp5uL&-
From a box of Ideal wire nuts;
