Wrong type of upper vent?
My Dometic 2652 located in a slide has never cooled well. With the addition of fans I have been able to keep the refer temp around 40 degrees. All systems have been checked and properly serviced. ...
Forum Discussion
joshuajim wrote:
Here ya go.Click For Full-Size Image.
OK, your modification is not correct. The fans need to be about 4 inches higher and not pulling air where they are. That silver metal plate needs to STOP even with the top of the Condenser fins. Then just mount the 2 fans to the back wall of the refer just below your curved upper radius. What is the width between the radius vane and the metal mount plate the fans are mounted too? Doug
