Wrong type of upper vent?
My Dometic 2652 located in a slide has never cooled well. With the addition of fans I have been able to keep the refer temp around 40 degrees. All systems have been checked and properly serviced. ...
Forum Discussion
joshuajim wrote:
Doug
The "silver metal plate" is a factory install by FR. I tried the 4" higher fan location first as indicated by the patches in the photo. The lower location seemed to work better. The distance between plate and back is 2.5".
I'll pull the refer one more time (got it down to less than 8 minutes). cut the plate and relocate the fans to the back. Would about and inch spacing off the back wall seem about right?
I might mention that when running the "exhaust" air is about 113 degrees vs 92 at the bottom inlet.
FR, That does not mean good things. FR screws up more refer installs than all other OEM's combined. Yes, do the modification. You need to get as much air THRU the Condenser fins as possible to remove the heat. Doug
