Yes it's my own D***N fault
First part of this was posted Sunday on the "What Did You Do to Your Class A MH Today" Forum. Not really asking for help. Sympathy maybe. Just really a comment. Perhaps someone will learn something...
Forum Discussion
You need to charge them FULLY... meaning until float kicks in, then a top charge, then an EQ. If not done properly, they will suffer capacity loss due to sulfation.
Once the surface charge dissipated, they dropped back down to 12.5v. And at 30a acceptance, at only 13.8v, they were very likely still in the less than 80% soc range. Charge them up properly and they should be fine.
Once the surface charge dissipated, they dropped back down to 12.5v. And at 30a acceptance, at only 13.8v, they were very likely still in the less than 80% soc range. Charge them up properly and they should be fine.
