Yet Another PWM vs MPPT Comparison Test
I was able to run a couple tests with blue sky at same time of year and location as my test from two years ago (flat, tilted, tracking results one) that : A. compares PWM with MPPT, and B. compares ...
Forum Discussion
BFL13 wrote:
You could lower your solar float to 13.2v and get some (but only a little) MPPT advantage at that voltage instead of at 13.8 or whatever.
"Depends" whether that would be worth the bother most days.
On most controllers, MPPT is only operating in bulk mode, not Absorb or Float. Rogue in fact calls bulk mode, MPPT mode. Changing float set point would have no effect.
