Hi John, Will do that when I get all the data in front of me, doing lots of reading on hear as well as Dexter's Service Manual, taken lots of measurements I didn't need and haven't taken some I do need. The "HGR" is a manufactures abbreviation for "Hanger" lol - anyways looking at Dexters site in determining the E-Z Flex I need to order I am going to have to do some "bump clearance" measurements as my equalizer is the one that uses the K71-652-00 tandem kit and according to them it will lower the trailer approx. an inch. I'm sitting by the fire thinking I will be alright but don't want to order it and then find out different.
This is why I think I need to measure clearance, but also showing twisted hanger - that is a 5/64" allen in there.
This is one thing that has me hung up - twisted hanger.
Dexter also gave me lots of closer dimensions with regards to if you measure your spring length they tell you what the HGR/hanger spacing should be for double eye (actually for any spring axle 1, 2, or 3).
