Forum Discussion

LAdams's avatar
LAdams
Explorer
Jul 03, 2008

Dexter HD Suspension & EZ-Flex Install (long w/ pictures)

I recently purchased the Dexter HD suspension kit that comes with the new EZ-Flex Idler... I had installed a similar kit on my previous Nomad 27' TT and it worked quite well so I decided to install t...
time2roll's avatar
time2roll
Nomad
May 31, 2014
Bob Landry wrote:
I received my EZ-Flex kit today and was looking at the wet bolt/shackle assembles that come pre-assembled. Just holding the shackle in the position that I think it's going to hang on my trailer, the grease hole is going to be between 4-5 o'clock instead of the horizontal plane that I have read it should be on. I'm wondering how critical this is and if I should press out the wet bolts and reposition them.
File a chamfer or bevel relief around the hole and it should work fine.

About Tow Vehicles

From fifth wheels to teardrop trailers and everything in between.201 PostsLatest Activity: Feb 15, 2025