ScottG wrote:
An easy way to look at it is you can run one large load at a time. So either the AC, Water heater, micro, etc. but no two of these at once.
Yep, good advice. 20Amp will do fine for you, you are just going to have to think about it a bit more than 30Amp.
Even with 30Amp I have to be careful - everything tends to draw a big load when you first plug in and I find that
1. Charger in Bulk Mode
2. Water Heater
3. Refrigerator
4. Air Conditioner
all trying to start up at the same time will trip the breaker in short order.
I usually let the charger run for a bit until the load drops down on it, then let the water heater get going, and then finally crank the AC. YMMV.