2012 Yukon not seeing trailer connected
I have the factory integrated brake controller,(JL-1) this is the 1st time it's being used as I had to connect the red wires to the studs. Fuses are good, I have 12V at the studs. I have 12V at ...
Forum Discussion
I don't know if the previous owner did, but it looked like none of the 12V leads were hooked up.
The two big fuses for the studs are in place, and I have 12V to each of the studs.
The two big fuses for the studs are in place, and I have 12V to each of the studs.
