2018 RAM 2500 aux switches
For you RAM experts:
Our 2012 F350 caught fire and was totaled, when we finally got the insurance payout we bought a 2018 RAM 2500 6.7L Tradesman but it has a number of upgrades one of which is the aux switches. But after getting the right wires I cannot get it to work.
It has power at the switch panel inside--the power lights come on.
The switches are responsive to the computer control--I can assign a switch to battery power and the light comes on
The wire connector 'clicks' when it is pushed into the under hood connector
But I get no 12V on that wire? VS ground on the battery
Am I doing anything wrong? I checked a few fuses and they were OK I guess I need to check them all and check power at the fuse blocks
Hard to believe all the relays are bad.
Any suggestions would be greatly welcome
Which RAM forum should I try?
Our 2012 F350 caught fire and was totaled, when we finally got the insurance payout we bought a 2018 RAM 2500 6.7L Tradesman but it has a number of upgrades one of which is the aux switches. But after getting the right wires I cannot get it to work.
It has power at the switch panel inside--the power lights come on.
The switches are responsive to the computer control--I can assign a switch to battery power and the light comes on
The wire connector 'clicks' when it is pushed into the under hood connector
But I get no 12V on that wire? VS ground on the battery
Am I doing anything wrong? I checked a few fuses and they were OK I guess I need to check them all and check power at the fuse blocks
Hard to believe all the relays are bad.
Any suggestions would be greatly welcome
Which RAM forum should I try?
