7-Gallon Water Jug With Pump - REVISITED

rexlion wrote:
IMO the lower GPM rate, the better. Too much flow just splashes everywhere and wastes water. This summer I washed dishes and hands using a collapsible 5 gallon water container. The spigot is so small, the water dribbles out pretty slowly. I was surprised to find that I only needed about half the container (2.5 gallons for 2 weeks of camping. (Drinking water was in the cooler, btw.) When using the 12V pump on my previous trailer, I'd blow through 10 gallons in 3 days.

These pumps are rated in GPH, not GPM :)

I got tired of lugging the barrels over and over and went this route:

The Journey of the Redneck Express wrote:

Sunday, February 22, 2009

Project #15 - 30gal Auxiliary Water Tank

I originally got my water tank refilling idea from BradW's handy 7 gallon portable water filling solution a long time ago.

7-Gallon Water Jug With Pump


BradW 'From 7-Gallon Water Jug with Pump' wrote:






I’m sure someone else has done this before me, but I thought I would posts some photos anyway. We sometimes camp at places that don’t have water, so we carry along some extra water jugs. Some other places we camp have water, but no way to hook up a hose to refill the supply tank on our truck camper.

I got tired of standing with a 7-gallon water jug on my head trying to refill or supply tank, so I added a $17 12 volt bilge pump to the water jug cap. Both have a 3/4” pipe thread fittings and just screw together. I can now empty the 7-gallon water jug into the supply tank in under 2 minutes.

It is also useful for putting RV antifreeze into the supply tank for the annual winterization. I just pour all the pink stuff into the 7-gallon jug and pump it in.

The jug and pump are available at Walmart.

Brad




I liked this project quite a bit, and built my own version of it after a fashion, substituting a 10' standard RV hose for the black marine hose that BradW used.

However, as handy as this was, doing this 4-5 times in a row to refill the onboard tank got old, really fast. Not to mention, I could never get the pump to stay in put, it would always try and turn when you unscrewed the lid from the jug.

So, a long while back, I started a couple threads asking about details on those big 30 gallon plastic barrels. After gathering the information I needed, I wound up waiting a couple years until I eventually had built my front cargo rack (next project thread to be posted).

I did a search on Craigslist and found a used Peach Flavoring barrel from Kerry Foods for $25 that came with twin bung plugs that had 3/4 threading in them for the attachment of pipe.

I wound up building this, using the pump I had originally been using with my jugs:

(Click Image to view enlarged)




The tank has two ball valves, PVC because I couldn't find an affordable brass one. The upper one is the breather and is raised up above the top of the tank to facility a full fill. The lower one has a male garden hose thread on it, which the modified pump assembly attaches to.

I use a double-female coupler to fill the tank via regular RV hose, simply screw on double female, attach RV water hose in normal fashion, then open both ball valves and turn on the faucet. Your standard water pressure is more than sufficient to bottom fill the tank 30 gallons. When it reaches full, I close the bottom ball valve and then turn off the spigot.

The other advantage of the auxiliary is I can take it, an RV hose and a water thief to the filling spigot in most USFS campgrounds and fill the tank while leaving the camper behind at camp, which allows me to refill the tank from bone dry in one trip.

With both tanks full, I start out with 60 gallons of fresh water to work with. This came in rather helpful while I was touring Whidbey Island with my wife-to-be, Dawn. The Washington SPs shut off the water spigots at the campsites during the winter to prevent freeze damage. The only water supply is the potable water faucets back at the dump station. Depending on the park, the dump station is a mile or so away.

mkirsch wrote:

Tom_Anderson wrote:
I use a siphon hose. I set the jug on my kitchen counter, then run the siphon hose out the window to the fresh water fill outside. Much easier, in my opinion.

Who's going to lug 60lbs of water and jug up the steps into the camper, and lift it up on the kitchen counter?

Me.

Tom_Anderson wrote:
I use a siphon hose. I set the jug on my kitchen counter, then run the siphon hose out the window to the fresh water fill outside. Much easier, in my opinion.

Who's going to lug 60lbs of water and jug up the steps into the camper, and lift it up on the kitchen counter?

Tom_Anderson wrote:
I use a siphon hose. I set the jug on my kitchen counter, then run the siphon hose out the window to the fresh water fill outside. Much easier, in my opinion.

Very good and simple solution. Thanks.

Tom_Anderson wrote:
I use a siphon hose. I set the jug on my kitchen counter, then run the siphon hose out the window to the fresh water fill outside. Much easier, in my opinion.

That's a very good idea -- minimum hassle. It won't work for me, though, because I can't lift heavy loads anymore. :)

I use a siphon hose. I set the jug on my kitchen counter, then run the siphon hose out the window to the fresh water fill outside. Much easier, in my opinion.

I use a 12VDC transfer pump to keep my TC filled, but I have two 42 gallon fresh tanks in my enclosed trailer to tap from. I also use the pump directly to a hose to wash off road toys before stowing them back inside.

Looking at the link, that's not a bilge pump, it's an aerator pump for filling livewells for keeping fish alive. The difference being a bilge pump operates while submerged in water. A aerator pump has a threaded pipe for an intake. In the link picture, the threaded pipe goes through the cap. You can find aerator pumps at Walmart, Cabelas, BassPro or any marine store.

Thanks all.

The light bulb went on and I rediscovered a Flojet 12v pump in my "resource pile" that I'd purchased long ago for spraying calcium chloride solution on the gravel road for dust control. Never did that and the pump is unused.

I'll be using that pump for moving water from the 7-gallon jugs to the TC water tank.

I bought a Harbor Freight 12V water pump that has standard hose bib threads on the input and output. The input has a plastic elbow that is fastened to a length of plastic pipe long enough to reach the bottom of my 7 gallon water jugs. The output connects to my 25 foot water hose. 12V for the pump is via a 7 pole plug that plugs into the camper pigtail in the pickup and a push-on/push-off switch is mounted on the pump.

So, when we are in hunting camp and need water we put the 7 gallon jugs in the back of the truck, go to town and fill the jugs in place in the truck. When we get back to camp I pump the water directly from the jugs in the pickup bed to the camper. No lifting required.