Adding a fan to a preexisting roof ven
I am a newbie and recently purchased a 2014 Premier Bullet travel trailer. It has two roof vents, one in the bathroom with a fan and one in the main area without a fan. The fixture of both look to b...
Forum Discussion
I don't know what model you have, but mine is a 19fbpr. I installed a Maxxair vent in the main area by removing the internal shroud from the vent and fishing a wire to the driver side exterior wall to splice into the wiring coming into the top of my slide that powers the light over the dinnette. The ceiling lights are all on a switch and not powered unless the switch is activated. Installation of the Maxxair was not difficult and requires no holes in the roof. The most difficult part was fishing the wiring. You will be pleased with the powered vent.
