Advice for inverter installation
I'm adding a 600 watt inverter and the plan is to put it in the pass thru storage compartment, which will be just behind the batteries on the trailer tongue. My first inclination was to run the cable...
Forum Discussion
#1nobby, I'm not so worried about the floor itself, it's that plastic stuff that covers the whole underside. So far, there are no holes in it anywhere...and I've crawled under and looked. Wires and plumbing are apparently between the floor and the underbelly covering.
Another question...is there any reason the inverter should not be mounted to the front wall of the pass through rather than the back wall. The front wall would be closer to the batteries. Thanks for your help.
Another question...is there any reason the inverter should not be mounted to the front wall of the pass through rather than the back wall. The front wall would be closer to the batteries. Thanks for your help.
