Air ride!
I just installed an airbag suspension on my new '15 F350 dually and took it on the first camper trip. I will put at the end of this post the reasons for doing it to save the long narrative for those i...
Forum Discussion
Panhard rod mounted and getting adjusted:
There are a lot of big fasteners in a truck suspension. All of the hardware supplied is Grade 8, high quality pneumatic components, etc. Many of the bolts are specified to have high torque, 400 ft lbs for example on the 8 main link bolts. You need some big wrenches and sockets (up to 1 1/2 inch). Here is a partial pile of tools I used, does not show the 3 floor jacks and two sets of jack stands:
There are a lot of big fasteners in a truck suspension. All of the hardware supplied is Grade 8, high quality pneumatic components, etc. Many of the bolts are specified to have high torque, 400 ft lbs for example on the 8 main link bolts. You need some big wrenches and sockets (up to 1 1/2 inch). Here is a partial pile of tools I used, does not show the 3 floor jacks and two sets of jack stands:
