Anyone here with a Bigfoot TC?

Bigfoots year 2006 especially 10.5 & 10.6 and BF 3000 series all years 1 look floor wall separation along driver side wall & booth , vanity wall and shower to outside wall look on roof at shower sky lite flange for bulging and separation most important open door look at flatness of floor along dinette , curvature indicates probable damage to structure from flexingstress usually caused by poor assembly ( and stripped screw holes , egg shaped screw hole ,caused by vibration & ect in base ment look up internal wall of basement storage wall along sewage pipe look at if staples are backing out I have many stories about this problem with BF 10.6/10.5 and Bf 3000 series We have been to Bigfoot factory twice with this and have worked on many and seen other owners rigs with this. some are reasonable to fix others are a nightmare to fix depending on actual place ment of basement plumbing piping and space around tanks I believe Bigfoot has been aware of this due to my and others many repeated contacts with them about this problem for years and nothings indicates, they did anything about in house corrections until recently ( see recent tc magazine article Bigfoot tour) Good luck in correcting if you purchase



see my profile for how many Bigfoots I have owned. I have personally been to factory 2 times on this problem . Also BF paid for the back haul & return of my brand new 10.11 3000 series for this problem when Mark Homes was waranty boss