atwood GC6AA-10 hot water heater
Hi folks ,just new to forum looks good , anyway my question is ,when I first flip ignition igniter switch inside TT (propane mode) it will fire up for two seconds then quit, it will do this 3 times...
Forum Discussion
I had one that would try to light and go out. Cleaned the terminals on the circuit board with sandpaper and Bingo.There was a sticker in mine that said to clean the terminals before replacing the circuit board.
I pulled the 2 terminals to the right of the pressure relief, and the ones just below it and sanded them clean.
I pulled the 2 terminals to the right of the pressure relief, and the ones just below it and sanded them clean.
