Skinny D wrote:
What is the best tape (or other method) to secure wires to the underside of the TT?
I installed lithium ion batteries and an inverter in the front pass-thru storage compartment. Thus, I had to run wires from the compartment under the refrigerator (fuse and breaker panels), out the bottom of the TT, up to the front along the underside, then up through another hole into the compartment. The bottom is some kind of polymer or plastic sheet material. There is nothing to twist tie to.
I used Gorilla Glue tape which was supposed to be a permanent bond but most of that has fallen off and I have repeatedly applied more.
Why not snake them through the underbelly of the trailer, above the coreplast.