Bolts Failing on Equalizer Hitch
I have an Equalizer Hitch with 1400 lb bars. Today I replaced the third pair of bolts and nuts that attach the head to the shank They are grade 8, 3/4" in diameter and 5" long. The threads failed on t...
Forum Discussion
SoundGuy wrote:Ductape wrote:
A known weight at a measured distance is not "guessing".
The OP's application, as he's doing it, says otherwise since this is the 3rd set of bolts he's managed to destroy. So yeah, without a properly rated torque wrench he's just guessing. :S
I have to agree with that. They rent torque wrenches at rental stores cheap. I suggest renting a 3/4 drive one with socket and do it right.
I bet the breaker bar is real close to 'breaking' too. Not meant to have a cheater pipe on and stand on it...lol
