camper fitting in new truck
We're looking at a new Chevy truck and it seems the bed depth on them is 21.34 inches, which creates a problem, since our camper depth from bottom to overhang over the rails is only 20.75 inches. Thus...
Forum Discussion
dave17352 wrote:trail-explorer wrote:
foam board sounds like the easiest solution.
kbaum: Unsure of what "bracket" you are referring to on a GM truck that requires the camper to be raised.
It part of the way the back end of the box is molded. My 2011 has the same thing
In either 2007 or 2008 gm trucks changed the tail gate opening with the large lower radius mentioned. Its more than just the radius the opening dimension above the radius is also more narrow as shown in the picture. A 2006 isn't like this but my 2008 shown in the picture is. If the camper fit tight in your 2004 chances are it will not fit in a new gm truck.
