Cleaning the rack?
I have an Outfitter Apex with the manual lift roof. The rack & pinion lift was built be Heco. I suspect the same lift mechanism is used in other campers. On two occasions I've broken a tooth off th...
Forum Discussion
I don't have a popup, but I think accumulating dirt, oil, metal shavings, means you need a cover for the gears to keep the materials out of it. When up, I think it would be fairly easy to put a cover around the gears to protect them.
I think metal shavings suggests you need to clean it after initial break in and/or use a different lubricant/grease. For other similar mechanisms, I've found that making sure they are tight and in alignment helps.
I think metal shavings suggests you need to clean it after initial break in and/or use a different lubricant/grease. For other similar mechanisms, I've found that making sure they are tight and in alignment helps.
