Cool Mods - Thread restored 10/18/2012
My daughter was getting a little warm in her bunk during our last camping trip, so I decided to put her a fan in to keep the air flowing. I had been wanting to add a 12-volt fan to the main livin...
Forum Discussion
My trailer has a dinette with drawers for storage. I really like the convenience of the drawer storage but they left a lot of available storage area unused. More storage is always good. With some 1x2's and 1/4" plywood I was able add some overstock storage. This is what it looked like under the seating area before I started.
I used a air stapler and a chop saw to trim and secure the 1x2's.
Next I cut the 1/4" plywood on a table saw and the air stapler was used to secure the plywood.
This area is great for a RV Costco pantry. We store extra paper plates, paper towels, plastic flatware and such for long trips.
RV on!
Boom
I used a air stapler and a chop saw to trim and secure the 1x2's.
Next I cut the 1/4" plywood on a table saw and the air stapler was used to secure the plywood.
This area is great for a RV Costco pantry. We store extra paper plates, paper towels, plastic flatware and such for long trips.
RV on!
Boom
