DIY Stable Lift install... god help us.

here is my old thread if interested. Sound like it's going well.

http://lanceowners.hoop.la/topic/lance-1181-and-stable-lift

But you do like cookies don't you?:B

I haven't decided if I will modify my SRW lift to work on my DRW. As you can see, I have done the math. I have the material, tools, fabrication skills and the time. I used my lift for about 12 years. As much as I like my Stable Lift, I am just not sure if I like the 108 inch width.

The Stable Lift is a "load securement device" so you are fine.

Reddog1 wrote:
This is an old thread, but it may be of interest.

http://www.rv.net/forum/index.cfm/fuseaction/thread/tid/26007763/srt/pa/pging/1/page/1

Thanks Wayne. Very interesting thread. I am assuming you plan on doing the same to yours so you can use them again on your new truck?

Where are the lift/jack police when you need them? ;) Maybe they are on vacation with the weight police. :D

burningman wrote:
Well now that you're criminally overwidth, you just need to be a little heavier than your glove box sticker says and you can be in the Bad Boys Club. Welcome, we have cookies. And beer.

I only drink straight tequila.

This is an old thread, but it may be of interest.

http://www.rv.net/forum/index.cfm/fuseaction/thread/tid/26007763/srt/pa/pging/1/page/1

Well now that you're criminally overwidth, you just need to be a little heavier than your glove box sticker says and you can be in the Bad Boys Club. Welcome, we have cookies. And beer.

Ok. Re-measure. We are 106 for sure.