Do You Use Centering Blocks/Devices?
My new truck (2015 RAM 3500 SRW) is a bit wider (the outside of the bed) than the old truck. When I placed the camper in the bed last weekend I was concerned that the space between the wheel wells an...
Forum Discussion
I stood a 2x6 on edge the width of the bed at the front.
Then, I cut 2 pcs of 6x6 about 18" long at an angle and screwed & glued 'em to the ends of the 2x6.
The angle guides the TC to center when backing under it.
If one 2x6 is too close for comfort, use 2 of them. This will give you about 2" of clearance between the front of the TC and the upper front edge of the bed.
Works like a charm for me.
Then, I cut 2 pcs of 6x6 about 18" long at an angle and screwed & glued 'em to the ends of the 2x6.
The angle guides the TC to center when backing under it.
If one 2x6 is too close for comfort, use 2 of them. This will give you about 2" of clearance between the front of the TC and the upper front edge of the bed.
Works like a charm for me.
