Don't you LOVE electrical problems...
I put a new set of Sears Platinum batteries in my 2013 Eagle Cap in July 2013. I have 280 watts of solar running through a MPPT controller. My rig was in Yakima WA for several months earlier thi...
Forum Discussion
I measured battery voltage at the battery leads on the PD converter. It measures 12.1 vs 12.9 volts that I measure direct to the battery.
When I turn on the heater I measure 10.8 V at the converter and 12.7 V directly to the battery.
Why is the converter 12 V reading so much lower than the reading taken by my inverter and solar charge controller which are wired directly to the batteries?
When I turn on the heater I measure 10.8 V at the converter and 12.7 V directly to the battery.
Why is the converter 12 V reading so much lower than the reading taken by my inverter and solar charge controller which are wired directly to the batteries?
