Eternabond lifting rubber roof
Last year I applied Eternabond over all the factory applied lap sealant on my roof. I cleaned the surface using a 50/50 mixture of water and LA's Awesome cleaner. The Eternabond is holding well ho...
Forum Discussion
daystrom wrote:
Last year I applied Eternabond over all the factory applied lap sealant on my roof. I cleaned the surface using a 50/50 mixture of water and LA's Awesome cleaner.
The Eternabond is holding well however I've noticed in a few (small) spots the rubber roof has lost its bond with the decking directly under where the Eternabond tape is. The tape itself is still stuck to the membrane, the membrane is lifting off of the decking.
These are small 1" - 2" areas in probably no more than 5 random spots.
No where else is this happening.
Could the adhesive in the Eternabond be causing this to happen?
I've never heard of anything like that. The adhesive in eternabond isn't solvent based, so my guess is that the rubber never adhered properly in the first place.
