Extending Safety Chains
If I need to extend (or replace) the safety chains on my trailer, do I use the loaded weight of the trailer to determine what capacity of the safety chain/cable I need? Thanks!
Forum Discussion
That's just not going to happen crossed or not.My Keystone safety chains are held on by a U shaped rod with a very minor weld to hold the chains to the trailer coming together at the U. Crossed chains makes no difference.
Put your safety chains on and crank down the tongue of your trailer and see if the chains will hold up the trailer with the tongue jack fully in......Mine won't.
Put your safety chains on and crank down the tongue of your trailer and see if the chains will hold up the trailer with the tongue jack fully in......Mine won't.
