Ford 6.0 Scan Gauge II Question
I need to know if I can monitor my fuel pressure with my Scan Gauge II. The one gauge I programmed in is for Injection Control Pressure, my reading are from 883 PSI at idle and up.:hI've read fuel pre...
Forum Discussion
The ScangaugeII works well but takes time to setup where the Edge Insight is plug and play up and running in about 2min. On my 06 Ford with the Edge Insight CTS I run EOT-ECT-TFT-FICM-EGT-ICPpsi-ICPv-VGT%-all at on time-Boost in the dash-Fuel on the column-Volts off a power port.
JR
JR
