Free Camper Adventure: Moved Successfully!
Finally had a nice day here yesterday so I got over to the storage yard where the camper is. Reinstalled the LF jack, tightened the bracket bolts, and checked the rears too. Since no battery onboard...
Forum Discussion
If memory serves me those Home Depo trucks have a solid post at the rear for the sides to attach to , not a true flatbed . This would prevent you from using a cross beam after only jacking a few inches and driving the truck out from under . You would have to rely on the front jacks until the truck was out . If you think the Jack can support the load vertically , big IF , you could Rachet strap the legs together at ground level , left to right front and back , front to back left and right , then X , that should keep them vertical . Think everything over 3 times , be careful .
