happi jac's
Was in a conversation with an insurance appraiser today regarding some minor damage to my NL 8-11 Q Classic (fiberglass). As my camper is off the truck and sitting on the jacks he mentioned that he h...
Forum Discussion
Solved. One 75-amp push/pull switch, one piece of metal bent 90 degrees with a hammer and a vise and a few holes drilled in it (to mount the switch),a few inches of 10-gauge wire, a male and a female insulated flat spade connector and two ring terminal connectors and three small wood screws.
The 12V power feed that originally went to the controller goes instead to the switch, then from the switch to the controller.
I’d suggest anyone with any wireless jack controller do this.
