Holy sagging water tanks, Batman!
Since I was already having a venting problem with my FW tank, I decided this weekend to look and see why there seemed to be a bulge in my enclosed underbelly. The venting problem was a pretty simp...
Forum Discussion
Sorry I don’t have any pictures… this was a new 2000 Sunnybrook bought in 1999... the tank fell out in NC in the spring of 2001…
The flat stock was about 1 ½” x ¼”… one was located about 2” in from each side and one run at the center… there was tabs welded on the cross members to bolt the flat stock to…
Pretty simple repair but a permanent one…
The flat stock was about 1 ½” x ¼”… one was located about 2” in from each side and one run at the center… there was tabs welded on the cross members to bolt the flat stock to…
Pretty simple repair but a permanent one…
