Installing Progressive Dynamic converter
Maybe a month ago I bought a Progressive Dynamics converter to replace the OEM in my 2008 Bigfoot. I had a book of Electrician numbers to label the wiring. After removing the wiring I began hooking up...
Forum Discussion
It's 6 AWG.
The average crimpers don't do a good job for me so I usually solder the splice and the lugs and heat shrink anyway.
That way no question about the connections.
Hardware store probably has a butt splice that will fit if you have the crimpers large enough to do the job.
The average crimpers don't do a good job for me so I usually solder the splice and the lugs and heat shrink anyway.
That way no question about the connections.
Hardware store probably has a butt splice that will fit if you have the crimpers large enough to do the job.
