Manual Awning Question/Help
When the manual awning is fully pulled away from TT and the short slide arms/rails are extended now ready to be raised up on each side I have difficulty in pushing the arm/rails up. I do not extend on...
Forum Discussion
With the knobs loose does the knob push up and down freely into the hole? The knob most likely threads into a square nut that uses the sides of the rafter to prevent it spinning. If the knob gets over tightened it can cause the square nut to slip and sit corner to corner inside the track. This would have the effect of swelling the sides of the track and causing a bind. If that happens the know won't push freely up and down in the hole.
