My 7lb flexible solar panel system install
Last weekend I finally got around to installing a solar panel charging system on our little TC. Weight has been a concern for me and will remain to be, until I switch to a bigger truck, so I went with...
Forum Discussion
RoyB wrote:
I was thinking same thing about using an aluminum sheet. Wonder how much a 4'x8'x1/4" sheet of aluminum would weigh... That would be enough for two panels for my install.
Then I could mount the aluminum sheets up on alumimun unistrut sections. We probably approaching the weight of the non flex panels now hehe...
Roy Ken
3/16 is about 2.5# per sq ft panel is about 6.5 sf so that is 16.25# plus 5 for panel =21+# plus glue and hardware.
