My electric tongue jack on my Sunset Trail 27 RB light travel trailer is still working but looking tired. I can't even figure out what make the jack is. The foot pad dropped off somewhere and is lost. I'm considering buying a new jack. Working the hitch up and down to hook up is a lot of work and the electric jack is a necessity. I have seen the jacks for as low as $100 and as high as $229. I think my tongue weight is under a thousand pounds, maybe 800 LBS. Any recommendations on make? I'm looking for cheap but dependable.

"I think my tongue weight is under a thousand pounds, maybe 800 LBS?" Determine actual tongue weight...loaded and wet. If tired, replace. Lippert has worked well for me. CW has a good selection.

My new TT has one made by Atwood. It works fine but is horribly noisy and cheap sounding compared to The Barker I had on my last TT.

ScottG wrote:My new TT has one made by Atwood. It works fine but is horribly noisy and cheap sounding compared to The Barker I had on my last TT.Same here. I have an Atwood Electric Jack that came on my Creek Side and it's has sounded like it's on it's last leg from day one. I can't think I'd buy another one just based on that.

Get The Barker... They're all rated for 1000s of pounds, not really for the actual tongue weight. The extra power is handy if you're parked a little off level and the hitch is stuck on the ball.

Harbor Freight jack goes up and down as directed. It has a light. Cheap with a 20% off coupon. My point is that the cheap ones work. Keep it covered and I think that it will be moved to its third trailer in a year or two. Not necessary, but I drilled new mounting holes to gain tailgate clearance. Didn't mind doing it to a low priced jack.

Need advice on buying an electric tongue jack. | Good Sam Community

Spade_Cooley
Explorer
Sep 27, 2017
Thanks for all the help. My hitch is old and ugly but it still works. After looking at the various hitches on the internet I discovered mine is a Baker. Why in the world didn't they put a name on the hitch that would stay put rather than decals that go away. I called Baker Customer Service this morning and ordered a few parts to keep it going. I have the lesser 3,000 model.
ROBERTSUNRUS
Explorer
Sep 27, 2017
:) Hi, my trailer came with a Barker. After more than ten years of use it stripped a gear. I bought another brand tongue jack and it had to be replaced under warranty three times. I bought a replacement gear for my Barker and it's back on my trailer. I later bought another spare gear for my 13 year old trailer.
aguablanco
Explorer
Sep 27, 2017
Had an Atwood that died and gave THIS a try. Have been pleasantly surprised. Quiet, good looking and quicker than my old one. Used it many times on our recent 30 day trip and it worked flawlessly. Great price on top of it all.
RichH
old_guy
Explorer
Sep 27, 2017
I suggest getting the barker also. I had a heart attack when I was 39 and cranking by hand was hard on me so I bought a barker. I had that barker for 20 years and when it came time to trade off the TT I gave it to my son and he used it for 2 more years and when he sold his TT he gave it to his cousin. it served us well and even barker inc was impressed. I think it belongs in a museum or something
atwowheelguy
Explorer
Sep 27, 2017
Most who use a weight distribution hitch need to lift the trailer tongue AND the back of the truck to attach the weight distribution bars. If you size it just to lift the unattached tongue, it will not be sufficient to lift the back of the truck also to attach the WDH bars.

My tongue weight is 780 lbs. and the 3500 lb. tongue jack is slipping a gear (probably a torque limiter) when it gets near the height I need to attach the WDH bars. If I ever have to replace mine, I will go to a 4500 lb. rated jack.
pira114
Explorer II
Sep 27, 2017
Huskey Brute 4500. Last one you'll ever buy most likely. And probably the quietest one made
ScottG
Nomad
Sep 27, 2017
GordonThree wrote:
Get The Barker... They're all rated for 1000s of pounds, not really for the actual tongue weight. The extra power is handy if you're parked a little off level and the hitch is stuck on the ball.

X2.
I abused my Barker for 13 years by lifting the back of my truck enough to break loose a sticking coupler and I never performed the maint. called for.
They take a ton of abuse and just keep asking form more.
TomG2
Explorer
Sep 27, 2017
Harbor Freight jack goes up and down as directed. It has a light. Cheap with a 20% off coupon. My point is that the cheap ones work. Keep it covered and I think that it will be moved to its third trailer in a year or two. Not necessary, but I drilled new mounting holes to gain tailgate clearance. Didn't mind doing it to a low priced jack.
GordonThree
Explorer
Sep 27, 2017
Get The Barker... They're all rated for 1000s of pounds, not really for the actual tongue weight. The extra power is handy if you're parked a little off level and the hitch is stuck on the ball.
Vintage465
Nomad
Sep 27, 2017
ScottG wrote:
My new TT has one made by Atwood. It works fine but is horribly noisy and cheap sounding compared to The Barker I had on my last TT.

Same here. I have an Atwood Electric Jack that came on my Creek Side and it's has sounded like it's on it's last leg from day one. I can't think I'd buy another one just based on that.