Need Mattress measurements 2003 Star Craft 21rb

I have looked at foam thinking it would be cheap and it is not. I am guessing...like someone else posted here..that going that route and through starcraft i am looking at more than $800.

My thoughts are not moving them to the aisle...but folding the table / sofa into the big bed it makes...and just laying the mattress on top of that during travel...that would leave the aisle open.

How much is it to buy the split replacement cover from Starcraft? I would buy just the cover and then find someone local to buy the foam inserts from. I wouldn't be happy moving a one piece mattress into the aisle everytime I was putting up the camper....the mattresses are tucked up nice on the ends when folded and if we are on the road sometimes we stop and cook lunch inside and moving around with a big mattress in the aisle wouldnt' be fun....

I am still searching. I am fine with buying one whole mattress and it not folding up with the bed. I can store it inside the camper in the aisle. However a lot i am finding are 75" in length...which won't work because the distance between the bar to support the canvas is 74"...

Has anyone used Futon mattresses? The dimensions starcraft gave me per bed was 74 x 57....i am finding some futon mattresses that are 74 x 53. I would be losing 4 inches on the width...but in theory it sounds like it could be a decent solution that won't completely break the bank.

let me know your thoughts!!

I'd also like to add that we put a 3" memory foam topper on our mattresses because of the "hardness" of them. this help with keeping warm, too. (and provides for lots of laughs when rolling it up at the end of a trip to store in a sleeping bag bag...

Double post

An option is to look for 4" foam elsewhere and just buy the cover from them. An upholstery supply shop or maybe just an upholsterer should be able to provide it, shipping for something this size can be substantial. Where I get it they cut it to size for nothing and there is no shipping. Maybe get prices from both and take it from there.

I would be interested in hearing what your actual quote is on those mattresses. I checked into different places to get replacements for mine. I have a never been taken camping 2013 Roo 233s and would prefer the unheated mattresses. I liked my foam popup mattress that I slept on. I looked into purchasing hybrid matresses from Surveyor and Jayco as well as having them custom built and I was quoted prices of $500 - $600 each. I am going to continue my search and may post mine online to sell or swap.

Yes, that is right. So what happens is, when you close up, you pull the wide part (2/3) of the mattress in and up (flat) and then close the door and the small part (the 1/3) will be inside there with the tenting over it. That way, you can use the inside of the camper whilet he mattresses are folded up holding back the tent part.

We LOVE our 2003, we got it back in September and it was basically brand new. The man we bought it from on Craigslist was very meticulous and had added solar charging! Have FUN!

I was going to post a picture, but I don't have one without a sheet on it, and I don't have one with what it looks like closed up. Sorry!!! If I get out to our storage soon, I can take pictures!

That sounds right to me. Yes, the mattress is two foam pieces inside the cover, one for each half. It ends up being hinged by fabric in the middle so it can fold and sit on the bunk shelf when the bunk door is closed.

Well, in my case it's two even halfs. On yours, one side is wider than the other so it doesn't fold exactly in half.

Ray

Alright. Just got off the phone with Starcraft. What she said is the following.
Both beds are the same size.

Both use hinged mattresses. So she gave me 2 part numbers for the foam part that will create 1 bed. So for one setup she said i need
part 0710034 which measures 4" x 37" x 76 "
part 0710038 which measures 4" x 20" x 76"

And then you put those 2 together inside a cover which is part 0780120.g001 and it will create hte mattress for 1 bed.

So now my question is....does this sound right? Do your OEM mattresses consist of 2 mattresses within one cover?

The total measurements equal a 57" x 76" mattress. I would guess there is nothing stopping me from just buying a mattress with those measurements if i can find one.

Please let me know your opinions.