new bath fan Hengs
I have just finished installing a new Hengs conversion kit in the bathroom. I purchased the unit from"CW" and wasn't told about the one with the variable switch. Actually they wanted to sell me the ...
Forum Discussion
There should be two wires coming off the fan unit. One goes to switch in the fan one goes to the fan motor.
You would need to connect the positive from wall switch or power source to the wire from the fan and connect the other to ground. This can be done either with wire nuts or a crimp connector.
You would need to connect the positive from wall switch or power source to the wire from the fan and connect the other to ground. This can be done either with wire nuts or a crimp connector.
