New shore power inlet installation
Here's a project I did about 2 weeks ago. It's the same style inlet that I have on my truck camper. Here's the other thread of mine which has the details. I'm sharing it here since this is a ...
Forum Discussion
I replaced the pullout mouse hole cord several months ago with a marine type. Too much of a pain .
The mouse hole cut out was was too large for the bulkhead mount marine plug so I cut a piece of hdpe plastic to go over it with a proper sized hole for the new receptacle
The mouse hole cut out was was too large for the bulkhead mount marine plug so I cut a piece of hdpe plastic to go over it with a proper sized hole for the new receptacle
